My system is working well after problems were cleared away by G4WNC and G4JBD who so kindly spent hours with me.
However, I do have an oddity that has been evident since the very first download and would value your opinions.
VARAC can be going well but, every so often it will go all 'coy' on me and refuse to function. Check all settings and still nothing works .ie no TX. or TUNE etc.
The simple solution is to reduce the Window, or close it down, and then bring up my DIGIPAN. Click on TUNE...working FB, close down DIGIPAN.
Return to VARAC..press TUNE...All is well and working well!
Might it be Murphy at work?
Victor G3JNB
I am not aware of those issues and got no other report for now. Sounds like a COM-PORT hangs you have when several programs are dighting for CAT CONTROL. you need to control it either using a virtual comport like VSPE or OMNIRIG or just be aware that you can't have multulpe application working on the CAT COMPORT at the same time. however, when that happens, enable debug mode (under varac settings), try to do things that do not work, and send me the VarAC.log file for inspection.