I found a bug in the cat conf ini file for the ic7700 the begin of the adress for the ptt control has a different beginning of the mode settings...
i am also searching for the correct command to set the trx to the usb data mode. trying to modify the last digit brings me to several modes but not the usb-data mode at the moment.
any ideas all around?
Thank you for the interesting part of software!
Best regards
DL2GHM
Martin
Thank you again for the very fast solution and help!
Great support!!!
the first method worked.
Try this:
ModeUSB_D=FEFE74E02600010201FD
or
ModeUSB_D=FEFE74E02600020101FD
thank you very much for the fast reply.
Yes that works!
But - i want to use the data 2 mode sorry....
Only one step away for the solution!
THANK YOU!!!
also for the filter settings.
Best regards
Martin
DL2GHM
Please try this and let me know if it works so I can fix in the file I distribute:
ModeUSB_D=FEFE74E02600010101FD
This is for Filter 1.
You can use these for filters 2/3:
FIL2: FEFE74E02600010102FD
FIL3: FEFE74E02600010103FD