Set IC-7300 to Narrow filter FIL3 by default with OmniRig

So you use VarAC and OmniRig. but you want VarAC to set your frequency with the narrow filter FIL3 instead of the default filter FIL2. So here is a quick solution:

Close VarAC and OmniRig.
Go to "C:\Program Files (x86)\Afreet\OmniRig\Rigs" (or where OmniRig is install)
Look for the file IC-7300-DATA.ini
Open it with a text editor.
Look for this section (that starts with [pmDIG_U] and replace with this:

[pmDIG_U]
; These lines select USB-D for USB digital mode
Command=FEFE94E0.2600.01.01.03.FD
ReplyLength=16
Validate=FEFE94E02600010103FD.FEFEE094FBFD

Make sure your OmniRig is set to IC-7300-DATA:

Make sure your VarAC is set to USB-D

That's it.

Enjoy :)

de 4Z1AC - Irad

10 comments

10 Comments

Stefan DK5SM

Mar 14, 2022

Irad,

could you please help me out with an OmniRig issue on my IC-705? I would like to set FIL1 instead of FIL2/3.

I tried to accomplish this, but did not understand how exactly to adjust the command in the IC-705-DATA.ini.

Thanks in advance & 73,

Stefan | DK5SM.

irad d

Mar 14, 2022

Replying to

Try to replace the section in the ini with this :

[pmDIG_U]
; Select USB-D for USB digital mode
Command=FEFEA4E0.2600.01.01.01.FD
ReplyLength=16
Validate=FEFEA4E02600010101FD.FEFEE0A4FBFD