To test this feature, visit your live site.

Cat command for ts-2000

in VarAC - HF discussion forum

Hi everyone, just to inform that the following command line work correctly with the ts-2000:

AntennaTuner=AC111;

and can be added in the next version of configuration file.

[Kenwood TS-2000]

CmdType=TEXT

PTTOn=TX0;

PTTOff=RX;

ModeUSB=MD2;

ModeUSB_D=MD2;

ModeFM=MD4;

SetFreq_Data_method=TEXT

SetFreqVfoA_Cmd=FA{};

SetFreqVfoA_param_length=11

SetFreqVfoA_hz_res=1

ReadFreqVfoA_Cmd=FA;

ReadFreqVfoA_Result_Data_method=TEXT

ReadFreqVfoA_Result_hz_res=1

ReadFreqVfoA_Result_Length=14

ReadFreqVfoA_Result_Freq_Start_Pos=3

ReadFreqVfoA_Result_Freq_Length=11

AntennaTuner=AC111;

VarACStartCmd=

VarACExitCmd=

The ts-2000 store previous tuned frequencies values so i will use it only with bandskip parameter enabled.

Hope this helps

'73

Luca

4 comments

Comments (4)

Johan Forsell

Apr 25

Is there a command to set the Lo and High width settings? And what should they be set to?

EA8DJR Luca

Apr 25

Replying to

Yes

SL11; SH03;

This set to 1k low and 2 k high

The more balanced solution i've found for vara. With ts2000 i was not able to have 600 hz bw on ssb.

EA8DJR Luca

Apr 25

Also added:

VarACStartCmd=GT020;

VarACExitCmd=GT015;

Useful for setting the fastest AGC when entering VarAC and going back to medium-fast AGC at the exit.

Verified working with ts-2000.

irad d

Apr 13

Thank you. I added it to the main file now.