I would like to have two separate copy's of VarAC V9.1.0, on to use with my ICOM 9700 and the other with the ICOM 7300. I am not sure if the new version is set up to accommodate that or if there is a way to configure the new version for two separate radio's?
When installing two versions of VarAC V9.1.0 I get errors on setting up the radios for HF and VHF.
IS this set up doable....?
Thanks in advance,
Ray WD4SEN
So you want to run 2 radios at once, or do you want to have 1 install that can switch between radios? Both 100% doable, the first is a Cluster install and the other uses Profiles, both well covered here with just a little effort of searching. But please confirm what you want to accomplish.
This is totally doable.
Explore more by goint to settings -> Switch profiles.
Rear more about VarAC profiles to achieve this.
I run VarAC for HF to a Flex Radio and VarAC FM to a Kenwood TS790, both at the same time on the same computer - no problem. I have separate installations of VARA HF and FM modem, with two installations of VarAC - one pointed to VARA HF modem and one pointed to VARA FM modem.