With the new 10.4.3 update and a new Windows 11 update I can't get the rig control for the Yaesu FT-710 to switch frequencies when using VarAC. I have downloaded the latest CAT command file. If I run FLRig it will change frequencies and works the way it should but if I try it on CAT (Yaesu FT-710) it won't change frequencies. I have the Load Last frequency checked, Offset Hz: 0, Read frequency every 2 seconds(not checked), Enable antenna selector(not checked) Antenna tuner(OFF), DATA-U-7105000. Everything else from transmitting and chatting and other functions seem to be working great. Not a huge deal because it works by manually setting frequency(and I pretty much just use 20m) and I can also make it work with FLDigi, Any suggestions for me let me know. Thanks in advance for the help!
Mark
KF0KZP
Thanks for the help. Actually after a lot of messing around and trying different settings deleted and reloaded my drivers for my radio, made sure I had the current Windows 11 updates did a cold boot and went to the settings i had before and it is all working the way it should be. :-) So not sure if it was the drivers or Windows 11 itself but working now. :-) Love the program and thanks for the help!