I just witnessed my FT-891 transmit during an "Incoming Connection Request" message. This is very disappointing since I had the Disable PTT box checked. I run an 80 meter end fed with a multi-tap toroid to match various bands. The tap is currently set to perfectly match 40 meters, but I had switched the program over to 20 meters just to check the band for activity. Not sure if the rig has self protection against high SWR. Is this an expected event, or should I be able to trust my rig will NOT transmit when I tell it not to?
As a follow-up question, I have occasionally left the program running just to see how many stations have beaconed or called CQ overnight and in the morning noticed the "Incoming Connection Request/No luck. Maybe next time" message and have wondered: Since I do not send beacons unless I am sitting at the rig, does this mean someone has randomly tried to connect with me even though I have not been active for many hours?
Files sent. Thanks for your help with this. Hopefully it's something simple on my end.
Ok. I jus want to make sure your VOX is not turned on. As the VARA modem does send out sounds. but VarAC should not not trigger the CAT command for PTT.
No Vox involved ?
Was there any other program running with VARA modem as the same time (Winlink?)
Can you kindly send me the VarAC.log of the past few days ?
Can you send me a screenshot of the settings screen ?
Send them to my email iradirad@gmail.com
Thank you
Using CAT for both PTT and Frequency control. Yes, the radio's red TX light went on. It was only a couple of seconds, but it definitely was transmitting. It happened so quickly I did not have the chance to also look at the screen, just the radio. When I did look, it was telling me to "hold tight."
Sorry for my last message. I did not read your message correctly.
I mean did u see it actually transmitting or just saw the mesaage on screen ? What ptt method r u using ?