I am having problems with decoding Vara.
My rig is a Yeasu FT-991 and it is ok with all data modes except Vara,
I have full control of the rig in Vara it will switch to TX and change
bands from the program so it is not the com ports or the baud rate,
although i can hear signals coming into the rig it is not showing in
the decode panels (last heard beacons or last heard CQ calls) i am
convinced that i have a setting incorrect but at a loss to what it may
be i have tried the internet for an answer but my issue is not covered
as far as i can see,
I have tried to TX a beacon and have been spotted in Italy (from the
UK so to some extent the program is working although not many spots,
mostly no spots at all.
do I need to use WinLink to run Vara
Hoping that you can help me fix this brilliant program.
73 Peter G6ZRV
As an example: https://www.varac-hamradio.com/forum/varac-hf-discussion-forum/unable-to-decode-any-messages
Plenty of coverage of that here in the forum, just search for 991A.
But short answer is do you have the 991A's menu item 64 and 65 set to 1500Hz as needed?